Does the AV-HSI plug directly into the AV-30?
No, the AV-HSI is mounted under the panel and wired to multiple AV-30s on the 15 pin side and the 9-pin side is wired to the GPS and/or Nav. The AV-Link can be connected to the AV-HSI. This will share information to all AV-30s that are connected and updates can be completed to all AV-30s.
What Navigators are compatible with the AV-HSI?
Please reference the AV-30 installation manual as the compatible sources are listed: Avidyne IFD 410/440 and 510/540/545 | Garmin GPS 400(w)/GNC 420(w) | Garmin GNS 430(w)/530(w) | Garmin GTN 650(xi)/750(xi) | Garmin GPS 175/GNC 355/GNX 375 | Garmin GPS 155XL/300XL | Avidyne IFD 440/540/550 | Garmin GNS 430(w)/530(w) | Garmin GNC-215 | Garmin GTN 650(xi)/750(xi) | Garmin GNC 255 | Garmin/Apollo SL30 | Trig TX56(a) | Handheld GPS with NMEA 4800 or 9600.
During the configuration of the AV-HSI only one AV-30 is able to configure the AV-HSI?
Make sure that you have the AV-HSI configured correctly for the 2nd AV-30. In the AV-HSI configuration confirm that the serial port is set to AV30. This should then allow you to access the AV-HSI configuration on the 2nd AV-30. If configuration is correct and still unable to select the AV-HSI config menu in second AV-30 please check the wiring and pin layout for correct installation.
I am not seeing any information for the AV-HSI configuration.
Please confirm that the AV-30 has been updated to the latest software. If you have anything less than 3.0.1 then you won’t see the configuration menu.
Where is the software update for the AV-HSI?
The AV-HSI software has not been updated yet. Once it is update you will find the Service bulletin on the AV-30 support page and the AV-HSI support page.
I still have questions. Where do I go for customer support?
For additional customer support, please submit a Support Ticket to the uAvionix customer support team.
Comments
0 comments
Please sign in to leave a comment.