How To Set G-Load Limit

If you want to know how many Gs you pull each flight, set the high and low and watch as you get positive and negative Gs. 

Follow our video on how to set it up. 

Tech Tip Tuesday: How to Set G-Load Limit

In this demonstration video, we provide instructions on how to set the G limit on AV-30 unit. The instructions are as follows:

1. Press the left button 1X to enter the menu.
2. Using the center knob (PUSH-SET), rotate to highlight the area you wish to change (black box will appear), then press the center knob 1X to “PRESS TO CHANGE.”
3. Using the center knob again, rotate to select “G LOAD and then press 1X.

If you wish to reset it and start over again, follow these instructions below:

1. Press the left button 2X to enter the SETUP menu.
2. Using the center knob, rotate to the right until you see “G RESET PUSH TO RST” and press 1X.
3. Then, press the left button to select “DONE.”