AV-20-S Functionality and Use

AV-20-S: How to Set the Clock (Video Transcript)

Follow the instructions below in order to set the clock on your AV-20-S unit.

1. Press the left button to navigate to the multi-instrument screen.
2. Press the two bottom buttons simultaneously.
3. Use the left top and bottom buttons to adjust the hour (top to increase, bottom to decrease).
4. Press the right button to set the minutes. Again, using the left top and bottom buttons to adjust the minutes (top to increase, bottom to decrease).
5. Press the right button to set the seconds. Again, using the left top and bottom buttons to adjust the minutes (top to increase, bottom to decrease).
6. Press the two bottom left and right buttons to accept the change.

AV-20-S: How to Switch Between Function Pages (Video Transcript)

Follow the instructions below to learn how to switch between function pages on your AV-20-S unit.

By pressing the bottom left and right buttons, you can toggle through the function pages of the AV-20. If you press the top left button, you are able to change the function view.

For a more visual demonstration of these steps, please watch the video above.

AV-20-S: How to Set User Timers (Video Transcript)

Follow the instructions below to learn how to set user times on your AV-20-S unit.

Counting Up

1. Navigate to the timer screen, by pressing the bottom right button.
2. Press the left top button 1X to start the timer.
   • To pause the timer, press the left top button 1X.
3. Reset the timer by pressing and holding the left top button, until the timer is zeroed out.

Counting Down

1. Navigate to the timer page. Simultaneously press the bottom left and right button.
2. Press the left top and bottom buttons to select hours.
3. Press the right button to set the minutes. And again, use the left top and bottom buttons to make selection.
4. Press the right button again to set the seconds, using the left top and bottom buttons to make selection.
5. Press the bottom left and right button simultaneously to accept and save your timer.
6. Press the top left button to begin the countdown.