AV-30 Add VSI To Traffic Display

Tech Tip Tuesday: Add VSI to the Traffic Display (Video Transcript)

The following instructions will allow you to add VSI to the Traffic Display on an AV-30. going to show you how to place a VSI on the side of the traffic display.

1. Press the left button 1X to go into the menu.
2. Rotate the center knob to VSI (if turned off, it will say DISABLED).
3. Press the center button 1X, rotate the center knob to enable (screen will read ENABLED), and now you have the VSI being displayed.

This will be available so that you can replace your VSI and have traffic displayed. And that's how you set the VSI on your traffic display.